The VENICE Extension System (CBK-3610XS) enables cabled separation of the VENICE camera body and image sensor block by up to 5.5m with no degradation in image quality.
The kit consists of a front panel cover, image sensor block case and a 2.7m (9 ft) cable with an additional 2.7m (9 ft) extension cable. (VENICE camera is not included.)
The Extension System also has an HD-SDI output and a 24V output for powering accessories such as lens servo motors and monitoring. Multiple screw holes on all surfaces make it easy to affix additional accessories and fit with a wide variety of rigs. The Extension System is fully compatible with all existing and future VENICE cameras upgraded to V3 or higher firmware.
The Extension System is fully compatible with VENICE and VENICE 2 camera systems with 6K imager block.
Specifications
General | |||||
|---|---|---|---|---|---|
Size & Weight | |||||
WEIGHT (CBK-3610XS) | Approx. 2.9 kg (6 lb 6.3 oz) (excluding supplied accessories) | ||||
WEIGHT (IMAGER BLOCK TO BE INSTALLED TO CBK-3610XS) | with PL Mount: Approx. 1.9 kg (4 lb 3.0 oz) with E Mount: Approx. 1.4 kg (3 lb 1.4 oz) | ||||
Power | |||||
POWER CONSUMPTION | Approx. 2.4 W (with 2.7 m extension) Approx. 3.9 W (with 5.5 m extension) | ||||
Operation | |||||
OPERATING TEMPERATURE | 0°C to 40°C, 32°F to 104°F | ||||
STORAGE TEMPERATURE | -20°C to +60°C, -4°F to +140°F | ||||
Inputs/Outputs | |||||
DC INPUT | 24 V IN connector (Fischer 3-pin) (1) | ||||
DC OUTPUT | 24 V OUT connector (Fischer 3-pin) (1) | ||||
HD MONI INPUT | MONITOR IN connector (BNC type) (1) | ||||
HD MONI OUTPUT | MONITOR OUT connector (BNC type) (1) | ||||
